BRUSH CUTTERS

Commercial-grade Brush Mower was designed with versatility in mind. Utilizing high end hydraulic motors into a large gearbox this mower simply cuts better, faster and quieter than others on the market!

The dual swing away blades are capable of hacking down up to 6” diameter material while doing a very nice job on thick weeds and grasses as well. These blades are also easily replaceable, and they are affordable.

The deck is constructed of heavy-duty ¼” steel and is completely free floating. This means the mounting plate moves independently of the mower deck making cutting on uneven ground or ditches a breeze.

The back of our mower is designed to be rolled across the ground on a heavy-duty 6” roller standard and the front is picked up with the tilt on the skid steer using two 13,000 lb heavy-duty non-weather rated straps, which takes the shock out of your machine and body. This makes our mowers smoother and quieter than our competitors.

V slots are cut into the deck to help funnel material into the blades as well as allowing the mower to mow up to a fence post or tree without cutting it off. Mower manifolds are designed to bypass fluid should your blades become lodged and the mower comes to an abrupt halt ensuring that you will not damage the mower! This standard flow mower requires 14-25 gallons per minute of flow to run highly effectively!

 

Features:

• Commercial Grade!

• ¼” HD Deck

• Free Floating Deck

• Lift straps for operator comfort, ease on the machine and quiet!

• Eaton Char-Lynn Hydraulics and Omni Gear Boxes

• Easy To Replace Blades

• Standard Flow Rate 14-25 GPM

• 6” Material Rated

 

This Brush Cutter is one of the most durable and powerful cutters on the market, engineered to take on the challenge of land clearing.

 

• Durable powder coat finish

• Flat face fittings factory installed and included

• Bidirectional blades

• Built in relief valve

• Heavy duty bearing assembly

• Durable drive unit

• 3 Blades

• 6" cutting capacity

• Front push bar

• Oil level sight glass

 

Features:

• Motor (GPM) Low/Mid/High  (16 - 30)

• Drive unit (HP) 150

• Deck (inches) .25  A-36 steel

• Blades AR-500 steel

• Blade carrier (inches).50  A-36 steel

The CID X-treme Tree Reaper combines strength and efficiency. The Tree Reaper has a sleek tapered deck for a slim angled cut and sturdy push bar design. The Tree Reaper can use a 16-26 GPM Gerotor Motor (no case drain required) providing a 5″ cutting capacity. This cutter features replaceable skid shoes, three AR400 non-welded blades, and mulching teeth. This machine is by far one of our favorite attachments and for good reason!

 

Features:

• Motor Gear Motor

• Case Drain Not Required

• Flow Requirement (GPM)16-26 GPM

• Working Width 78"

• # of Blades 3

• # of Mulching Teeth12

• Weight (lbs) 1438

• Cutting Capacity 7"

• Teeth yes

The CID X-treme Tree Reaper combines strength and efficiency. The Tree Reaper has a sleek tapered deck for a slim angled cut and sturdy push bar design. The Tree Reaper 17-30 GPM Bent Axis Piston Motor (case drain required) providing a 7″ cutting capacity. This cutter features replaceable skid shoes, three AR400 non-welded blades, and mulching teeth. 

 

Features:

• Piston Motor

• Case Drain Required

• Flow Requirement (GPM)17-30 GPM

• Working Width 78"

• # of Blades 3

• # of Mulching Teeth 12

• Weight (lbs) 1438

• Cutting Capacity 7"

The heavy-duty Jenkins Iron & Steel Super Duty Mower is a step up from their standard Brush Mower. Utilizing a direct drive motor, as opposed to the standard gearbox, and a 1/4″ free-floating deck, this mower is ready for any challenge from 1" to 7″ in diameter. With 4 easy-to-replace blades, a 500 lb flywheel for maximum brush clearing and a standard flow rate of 14-25 GPM, you won’t find another mower like this.

The deck is constructed of heavy-duty 1/4" steel and is completely free floating. This means the mounting plate moves independently of the mower deck, making cutting on the uneven ground or ditches a breeze.

 The back of our mower is designed to be rolled across the ground on a heavy-duty 6" roller standard and the front is picked up with the tilt on the skid steer using two 13,000 lb heavy-duty non-weather rated straps, which takes the shock out of your machine and body. This makes our mowers smoother and quieter than our competitors.

V slots are cut into the deck to help funnel material into the blades as well as allowing the mower to mow up to a fence post or tree without cutting it off. Mower manifolds are designed to bypass fluid should blades become lodged and the mower comes to an abrupt halt ensuring that you will not damage the mower! This standard flow mower requires 14-25 GPM of flow to run highly effectively!

Optional wheels or push bars are available.

This mower is not ideal for heavy grass cutting, the standard brush mower would be a better choice for that work specifically. 

​

Features:

• 1/4″ HD free floating deck

• Eaton Char-Lynn motor

• 4 easy to replace blades

• Wheel kit available

• Standard flow rate 14-26 gpm

• No gearbox

• 500 lb flywheel for maximum brush clearing capability

Jenkins Iron & Steel commercial-grade Brush Mower was designed with versatility in mind. Utilizing high end hydraulic motors into a large gearbox this mower simply cuts better, faster and quieter than others on the market!

The dual swing away blades are capable of hacking down up to 6” diameter material while doing a very nice job on thick weeds and grasses as well. These blades are also easily replaceable and they are affordable.

The deck is constructed of heavy-duty ¼” steel and is completely free floating. This means the mounting plate moves independently of the mower deck making cutting on uneven ground or ditches a breeze.

The back of our mower is designed to be rolled across the ground on a heavy-duty 6” roller standard and the front is picked up with the tilt on the skid steer using two 13,000 lb heavy-duty non-weather rated straps, which takes the shock out of your machine and body. This makes our mowers smoother and quieter than our competitors.

V slots are cut into the deck to help funnel material into the blades as well as allowing the mower to mow up to a fence post or tree without cutting it off. Mower manifolds are designed to bypass fluid should your blades become lodged and the mower comes to an abrupt halt ensuring that you will not damage the mower! This standard flow mower requires 14-25 gallons per minute of flow to run highly effectively!

​

Features:

• Commercial Grade!

• ¼” HD Deck

• Free Floating Deck

• Lift straps for operator comfort, ease on the machine and quiet!

• Eaton Char-Lynn Hydraulics and Omni Gear Boxes

• Easy To Replace Blades

• Standard Flow Rate 14-25 GPM

• 6” Material Rated